Seismic data, Well log data and 3D object generated training image were made available for the study. Visual inspection of the seismic data revealed channel fills in Hatch field Offshore Niger Delta Basin. Two continuous reservoirs named reservoir-D and…
Oil shale is an unconventional source of fuel distributed across the world with only few active explorations due to the competitive advantage price of crude oil and natural gas. However, oil shale holds important application in the context of a decline in the…
Knowledge of reservoir fluid properties is very important in reservoir engineering calculations such as reserves estimates, material balance equation, and numerical reservoir stimulation etc. Laboratory measurements are the most dependable methods for…
Principles of sequence stratigraphy have been applied in the study of the Emi Field, Offshore Depobelt, Eastern Niger Delta. Using 3D seismic data, wireline logs of six wells, check shots, and biostratigraphic data sets, two sequence boundaries and three…
Pressure transient testing provides an indirect determination of reservoir and well parameters, it is one of the most essential techniques used to provide details about the reservoir characteristics and well conditions. There are several tests available to…
Drilling mud are complex heterogeneous fluids consisting of several additives. Cellulose from waste paper are viscosity builder in polymers, its use as viscosifier additive will reduce overall well cost, improve waste anagement while reducing environmental…
Gasoline station workers (GSWs) are occupationally exposed to gasoline daily. Our previous study on the toxicological and biochemical profile of GSWs in Onitsha, Anambra state revealed that GSWs are at risk of benzene and Lead-mediated toxicity. This was…
Liquefied Petroleum Gas (LPG), as a product of natural gas processing that is a mixture of hydrocarbon gases mainly propane, butane, butylene and impurities such as Sulphur compound. LPG production and distribution in Nigeria appeared to have had limited…
The aim of this study is to investigate the effect of process variables during dilute acid pre-treatment and enzymatic saccharification of sorghum stalk for cellulosic ethanol production. The sorghum stalk was pre-treated at different reaction temperature…
This study focuses on the effect cooling rate of different moulds on the microstructure (graphite flakes size, distribution) and mechanical properties of grey cast iron. Two common mould materials namely commercial silica sand and an industrial solid waste of…